EXPANDERS

Сортировка:
Показать:
Отображение: список сетка
  • Drive by Wire expander (DBW4)
    The Drive by Wire expander (DBW4) provides four configurable motor drives that can be used to control drive by wire throttles.  The connected ECU sends the required motor positions to the DBW4 via CAN. The DBW4 controls the motor position using a PID algorithm, whi..
    The Drive by Wire expander (DBW4) provides four configurable motor drives that can be used to control d...
    $1431.00
  • E816 Expander
    The E816 Expander module is designed to increase the I/O (input/output) capacity of MoTeC products.   With CAN connectivity and a number of configurable inputs and outputs, it provides customers with greater flexibility to add sensors, customise channels an..
    The E816 Expander module is designed to increase the I/O (input/output) capacity of...
    $1431.00
  • E888 Expander
    The E888 Expander modules are designed to increase the I/O (input/output) capacity of MoTeC products. With CAN connectivity and a number of configurable inputs and outputs, they provide customers with greater flexibility to add sensors, customise channels and control more au..
    The E888 Expander modules are designed to increase the I/O (input/output) capacity of MoTeC p...
    $1295.00
  • Ignition Expander module (IEX) (Autosport) M IGN EX AS
    The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeCECUs. This model is upgraded to an Autosport connector. The IEX connects to a single ignition output on the ECU and can drive up to 8 ignition modules. For 10 and 12 coil applications, two IEX units ..
    The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeCECUs. T...
    $690.00
  • Ignition Expander module (IEX) M IGN EX
    The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECUs. The IEX connects to a single ignition output on the ECU and can drive up to 8 ignition modules. For 10 and 12 coil applications, two IEX units can be used. Note that the IEX does not dri..
    The Ignition Expander module (IEX) is designed to increase the ignition output capacity of MoTeC ECU...
    $345.00
  • Standard Knock Module M SKM
    MoTeC’s Standalone Knock Module (SKM) provides individual cylinder closed loop knock control allowing tuners to safely optimise high performance ignition maps. The module is compatible with all 'hundred series' ECUs. The SKM is housed in a robust aluminium casing and can be mounted anywhere ..
    MoTeC’s Standalone Knock Module (SKM) provides individual cylinder closed loop knock control allowing tun...
    $1036.00
  • Synchronous Versatile Input Module (SVIM)
    The Synchronous Versatile Input Module (SVIM) is a compact expander that works in conjunction with an ACL or ADL3 Data Logger to facilitate the synchronised logging of high speed, high resolution inputs. The SVIM acquires data of the highest integrity for use in advanced cha..
    The Synchronous Versatile Input Module (SVIM) is a compact expander that works in conjunction with an&n...
    $3400.00
  • Traction Control Multiplexer (TCMux)
    The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeCECU. This model is equiped with an Autosport connector. It takes four individual wheel speed signals and turns them into one coded signal for an ECU to read as driven speed (wheels that have power), undr..
    The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeCECU. This...
    $780.66
  • Traction Control Multiplexer (TCMux)
    The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeCECU. It takes four individual wheel speed signals and turns them into one coded signal for an ECU to read as driven speed (wheels that have power), undriven speed (rolling wheels) and slip (percentage di..
    The Traction Control Multiplexer (TCMux) is designed to increase the speed inputs into a MoTeCECU. It ...
    $413.00